The Community of Miltonvale Park, Prince Edward Island, Canada
Bylaws of Miltonvalepark: Page 10 of 21
6
SECTION #9 – SERVICED RESIDENTIAL ZONE (RS1)
9.1 GENERAL
Except as provided in this Bylaw, all buildings and parts thereof erected, placed or altered or any land used in an RS1 Zone shall conform with the provisions of this Section.
9.2 PERMITTED USES
No building or part thereof and no land shall be used for purposes other than:
(1) Single Family Dwellings
(2) Parks and Playgrounds
(3) Accessory Buildings
(4) Private Garages
(5) Bed and Breakfasts
(6) Duplex Dwellings
(7) Semi-detached Dwellings
9.3 LOT REQUIREMENTS
The following regulations shall apply to centrally serviced development in an RS1 Zone:
(i) Minimum Lot Area 20,000 sq. ft.
(ii) Minimum Lot Frontage 100 feet (30 m)
(iii) Minimum Front Yard 50 feet (15 m)
(iv) Minimum Rear Yard 25 feet (7.5 m)
(v) Minimum Side Yard 15 feet (4.5 m)
(vi) Minimum Flankage Yard 50 feet (15 m)
(vii) Maximum Height of any Building 2.5 Stories or 35 feet (10.5 m)
(viii) Maximum Lot Coverage 25%
The following regulations shall apply to developments which are serviced by on-site sewage treatment systems and on-site water supply.
(i) Minimum Lot Area (see Appendix “B”)
(ii) Minimum Lot Frontage 150 feet (45 m)
(iii) Minimum Front Yard 50 feet (15 m)
(iv) Minimum Rear Yard 50 feet (15 m)
(v) Minimum Side Yard 15 feet (4.5 m)
(vi) Minimum Flankage Yard 50 feet (15 m)
(vii) Maximum Height of any Building 2.5 stories or 35 feet (10.5 m)
(viii) Maximum Lot Coverage 15%
Notwithstanding the above, where a lot is intended to be used for a duplex dwelling or an accessory apartment, Council may require that the developer demonstrate that the lot is of sufficient size to accommodate a second tile field and may also require that the on-site sewage treatment system be designed, inspected and certified by an engineer licensed to practice on Prince Edward Island.
All lots shall also conform to the Provincial Minimum Lot Standards as noted in Appendix “B”.