The Community of Miltonvale Park, Prince Edward Island, Canada
Bylaws of Miltonvalepark: Page 4 of 21
SECTION #3 – DEVELOPMENT ZONES
3.1 DEVELOPMENT ZONES
For the purpose of this Bylaw the Community is divided into the following development zones, the boundaries of which are subject to Section 3.2 as shown in Appendix “A” on the Official Zoning Map. Such zones may be referred to by the appropriate symbols.
ZONE SYMBOL
Residential Mobile Home Park MHP
Serviced Residential RS1
Residential R1
General Commercial C1
Light Industrial M2
Public Service and Institutional PSI
Recreation and Open Space 01
Environmental Reserve 02
Agricultural A1
3.2 INTERPRETATION OF ZONE BOUNDARIES
Boundaries between zones as indicated in Appendix “A” shall be determined as follows:
i) Where a zone boundary is indicated as following a street or highway, the boundary shall be the center line of such street or highway.
ii) Where a zone boundary is indicated as following lot or property lines, the boundary shall be such lot or property lines.
iii) Where a zone boundary is indicated as following the limits of the Municipality the limits shall be the boundary.
iv) Where none of the above provisions apply, the zone boundary shall be scaled from the original zoning map lodged with the municipality.
3.3 OFFICIAL ZONING MAP
Appendix “A” may be cited as the “Official Zoning Map’ and forms a part of this Bylaw.
3.4 CERTAIN WORDS
In this Bylaw, words used in the present tense include future; words in the singular number include the plural; the word “shall” is mandatory and not permissive; and the word “he” includes “she”.
3.5 UNITS OF MEASURE
Units of measure and conversion shall be in accordance with either Imperial or Metric standards.